Wednesday, June 29, 2016

4 Tips for Cleaning Roller Blinds

Cleaning methods for your roller blinds depend largely on the material that your blinds are made of. Here's how to keep your roller blinds looking their best.

Image Source: Flickr

Image Source: Flickr

Below are 4 tips for cleaning roller blinds:

Checking
It is important that you follow the care instructions of the blinds, to ensure that you are washing your blinds in a way that won't damage them.

  • If the care label indicates that you can wash the blinds (plastic/vinyl blinds), or your blinds are very dirty, you can thoroughly clean the blinds in a bathtub.
  • If the care label indicates that the roller blinds cannot be washed, you'll need to spot clean them, meaning you'll only clean the spots that are visibly dirty. Source: wikiHow

Removing
Remove the rolled up blind from the mounting hardware. I'm sliding a knife behind the bracket to release it. This is a Level or blind and they can be removed in a SNAP! (they're 12 yrs old btw)
Be sure to remove the roller mechanism if you can. You want to safeguard it from the water to avoid damage. Source: SnapGuide

Vacuuming
If your roller blinds will not stand up to being washed, you'll need to spot clean them. This is where you only clean the bits that are visibly dirty.  You can start by vacuuming your blinds as outlined above to remove most of the surface dust and dirt. Source: HomeImprovementPages

Washing
Use the brush attachment on the vacuum to gently brush over the surface and vacuum away any loose dirt, dead bugs, etc. Next, fill the bathtub about half full of warm water.
Add some laundry detergent to the water and mix together until a few suds begin to form on the surface. If the blinds are white, a small amount of bleach can be added to the water as well.
Next, carefully lay the blinds in the tub. If the blinds are long, it is okay to loosely layer them in an accordion fashion. Allow them to soak in the soapy water for a couple of hours.
Next, start at one end of the blinds and gently wipe them back and forth with a soft cloth or sponge. This will help remove any remaining dirt and/or stains. For tough stains, scrub them gently with an old toothbrush. Drain the sudsy water from the tub.
Fill with clean water and rinse the blinds. Repeat until all of the soap is removed. If soap residue remains on the blinds, it will act as a magnet quickly collecting dirt and dust.
If a partner is available to assist, the blinds can be held up and rinsed with a shower sprayer for quicker soap removal. Lay the blinds over a drying rack or outside on a clothesline until they are completely dried. Attach them back onto the roller and reinstall them over the window. Source: HowToCleanStuff

For more tips, don't hesitate to contact us here:

Contact:
Universal Blinds
601 – 1550 W. 10th Ave
Vancouver, V6J 1Z9
Canada
Phone: (604) 559-1988

The post 4 Tips for Cleaning Roller Blinds appeared first on Universal Blinds, Shades & Shutters.



from Universal Blinds, Shades & Shutters http://ift.tt/295QUxB

No comments:

Post a Comment