Do you want to learn how to clean windows and get the same results as the professionals? Read below to learn 3 helpful ways on how to remove window dirt.
Dust
Dirty, dusty windows are a breeding ground for allergy causing dust mites. Dust is particularly prone to building up on flat surfaces such as the windowsill. Keep the windows allergy-free by regularly damp-dusting with a 5-percent bleach solution. The will rid the area of mites and mold spores, and the damp cloth will prevent the dust from flying into the air and irritating you. For extra protection, wear a dust mask when cleaning windows. Clean blinds, shutters and shades weekly with a vacuum that features a high-efficiency particulate air (HEPA) filter, and damp clean them once every three to six months. A nearly allergen-free window covering option is privacy window film. Apply this directly to the window, which gives it a frosted look. It also reduces glare and UV rays. If you must hang curtains, choose lightweight fabric that is washable. Washing the curtains in hot water every three months will keep them from building up dust mites. It can be a lot of effort, but try these allergy fighting tactics with your windows, and with luck, you can prevent many allergens from getting inside and making your miserable. Avoiding the sneezing and sniffles is definitely worth the effort. Source: BedBathAndBeyond
Remove and Prevent Mold
Begin the process of removing mold on windows by identifying every point where it exists. Examine the glass and frames of the windows thoroughly to make sure that you know where every instance of mold occurs. This makes it easier to remove it all at the same time. Do not overlook the inner surface of the window frames; open the windows and check inside thoroughly.
If, when you come to clean the mold on windows, the panes and frames are dry, begin by putting on a respiratory mask and using a vacuum cleaner to remove any loose spores. Undertake this process when the window is open to allow the particles of mold an escape route. Slowly and steadily run the nozzle of the hose over the glass and the frames, making sure you cover every section. Once complete, clean the vacuum nozzle with a cloth dampened with vinegar.
Avoid using a vacuum if the windows are wet. Instead, put on a pair of protective gloves and use a cloth that has been dampened with tepid water to wipe the panes and frames of the windows. At this stage, your action should only be to remove the excess mold on windows. Do not rub too hard so you can avoid forcing mold spores into the wood of the window frame, and regularly rinse the cloth in clean water.
Once the excess mold has been removed, you will be in a better position to determine the full extent of the problem. Where the problem is relatively minor, spray some white vinegar onto the windows and leave it for a few minutes as you gather some baking soda onto a clean cloth. This can then be used to rub away the mold since the baking soda will act as an abrasive and the vinegar will kill the spores. If the problem is more extensive, dilute some fungicide in a bucket of water according to the instructions and use this to clean the glass and frames of the windows.
After removing the mold, dry the surface thoroughly with a cloth and inspect it again to ensure that there are no final traces of mold. If so, repeat the cleaning process again.
Prevent mold from returning by keeping the windows condensation-free. This can be achieved by wiping condensation away with a dry cloth. Whenever possible, keep the nearby area ventilated so that air can circulate and prevent the window space from becoming damp. Source: DoItYourself
Avoid Streaks
Most of us don't consider what's in the water we use to clean. In truth, it usually doesn't matter. But with glass, you see absolutely everything, so water content can make a difference — especially if you have hard water.
If you're diluting your glass cleaner, consider using distilled water. It doesn't have all the minerals in it that can be present in the water from your tap, so it won't leave behind any streaky deposits on your bathroom mirror.
Vinegar is one of those all-purpose ingredients that's tough to live without. It's as great on a salad as it in on your mirror, and it costs practically nothing.
Whether you're out of your usual glass cleaner or you're just looking for a cheaper option, vinegar can do wonders for your windows and mirrors. A vinegar-water solution (50/50) works great — just spray or wipe it on like you would any other cleaner.
The smell will stick around for a bit, so if you gag at the scent of vinegar, you might save this streak-free cleaner for outdoor glass. You know that bucket of glass-cleaning supplies you carry through the house when it's window day? There should not be a roll of paper towels in it. Paper towels leave not only streaks, but linty ones. Instead, go for a microfiber cloth, a squeegee, or, best yet, a handful of newspaper. Your morning read does an amazing job on glass. If you go with the newspaper, be sure to wear gloves. That ink gets everywhere.
Even if you do exactly the right things, you can still end up with a streak or three. In that case, the simplest solution is to finish the job with a quick buff. A chamois or a microfiber cloth is best, although a regular rag will do. Keep it dry, and just buff over the glass when you finish cleaning it. You'll find those streaks just disappear.
As always, keeping up with the job makes it a whole lot easier. The less dirt and grime your windows accumulate, the less time you'll spend cleaning them — a quick vinegar spritz, newspaper swipe and you're on your way. Source: Home
Anything worthwhile takes patience and practice to learn. If you want to get more information about window cleaning tips, please contact us.
Contact:
Universal Blinds
601 – 1550 W. 10th Ave
Vancouver, V6J 1Z9
Canada
Phone: (604 ) 559-1988
The post 3 Ways to Remove Window Dirt appeared first on Universal Blinds, Shades & Shutters.
from Universal Blinds, Shades & Shutters http://ift.tt/1VDouu8
No comments:
Post a Comment